We – EPG Team the largest gearbox & motors , couplings and gears manufacturing facility in China with 5 diverse branches. For far more details: Cell/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828
Welling fan motor for house appliances:
Merchandise attribute:
1. Stator size is optional
2. Safe, trustworthy, lower sound, good starting, lengthy lifestyle
3. Robust electricity
Rated voltage a hundred and ten~120V/220~240V-50/60Hz
Standard employed:
Exhaust fan, air purifier, micro-oven, admirer, induction cooker, refrigerator, pump, heater, hood oven, blwer, air conditioner, Heater devices, dehumidifiers
Thermal protector with 1 shot fuse or multi shot fuseAs a realiable good quality guaranty
Model | STATOR Measurement |
SHAFT DIA |
VOLT | INPUT Energy |
TORQUE (g.cm) | SPEED RATED |
YJ4808B | 8mm | 4mm | one hundred ten-240V | 6W | one.12mN.m | 3400RPM |
YJ4810B | 10mm | 4mm | a hundred and ten-240V | 10W | 3.42mN.m | 3000RPM |
YJ4810C | 10mm | 5mm | 110-240V | 14W | three.82mN.m | 3000RPM |
YJ4815B | 15mm | 4mm | one hundred ten-240V | 11W | seven.97mN.m | 3400RPM |
ABOUT US
Ritscher group was established in 2006.we usually emphasis on micro-motors for household and industrial electrical equipment.Currently, we have skilled micro-motor factories separatlly situated in ZheJiang & ZHangZhoug province.It has 50,000 square meters crops and more than 500 employees, yearly output is 5 million pcs and has 10 million pcs yearly generating capacity.Right after years improvement,we built a wonderful reputation in the domestic and oversea market and have the believe in from our global consumers.
We began our company from shaded pole motors, following 10 years advancement,our goods is enlarged to BLDC motors ,capacitor motors ,synchronous motors,stepping motors,servo motors, and PMDC motors.Our items are broadly utilized for generating fridges, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, massage machines and a lot of other equipments.
To style the lastest technological innovation motors and fulfill our buyers requirments,we have the quite able R&D crew,to make certain our items good quality ,we have quite strict control method for our manufacturing division & QC section,to make our expense reduced,we have the very professional purchase section, We dedicate to make every particulars better than we could do.
To supply fast and far better provider to our consumers in Australia and New Zeland,we set up department workplace in Australia since 2017 with exprienced advisor to help the enterprise ,which will deliver far more customers to get know of us.
We will maintain doing our job,transfer forward phase by step to make our company area broader and brighter.
Our company FAQ for you
(1) Q: What variety motors you can supply?
A:For now,we primarily give Kitchen Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so forth.
(2) Q: Is it feasible to go to your factory
A: Certain. But make sure you kindly keep us posted a couple of days in advance. We need to have to verify our
schedule to see if we are accessible then.
(3) Q: Can I get some samples
A: It relies upon. If only a few samples for personal use or substitute, I am concerned it will
be challenging for us to offer, simply because all of our motors are custom made made and no stock
offered if there is no more demands. If just sample testing prior to the official get and
our MOQ, cost and other terms are acceptable, we might love to provide samples.
(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~10,000pcs for different designs right after sample acceptance.
But it truly is also alright for us to accept scaled-down heaps like a number of dozens, hundreds or hundreds
For the preliminary 3 orders right after sample approval.For samples, there is no MOQ prerequisite. But the significantly less the much better (like no much more than 5pcs) on situation that the quantity is sufficient in scenario any modifications needed after first testing.
The use of original tools manufacturer’s (OEM) component figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our business and the outlined alternative components contained herein are not sponsored, accredited, or created by the OEM.